Basic Info.
Type
Power Source Arrester
Structure
Zinc Oxide Arrester
Installation
Parallel Arrester
Operation Voltage
Low Voltage
Certification
ROHS, ISO9001
Lightning Impulse Current (10/350) [Iimp
40ka/100ka
Scope of Application
Tt/Tns System
Power Indication
Green LED, When Normal, It Is Light on
Transport Package
in Cartons
Specification
55*32*27cm/carton size
Product Description
Summary:
This series of products adopt the patented technology to design and manufacture Class 1 single-phase power supply lightning arrester. The protection mode adopts 1 + 1 mode or four wire to earth mode, which can realize the comprehensive protection of single-phase power supply system equipment.
This series of single-phase power supply lightning protector has the most advanced power frequency overvoltage self-protection tripping device. In general, the lightning arrester will not be damaged due to the fluctuation of power frequency power supply. However, if there is an unexpected extreme situation and an unbearable continuous ultra-high power frequency overvoltage is applied to the lightning arrester, the internal tripping protection device of the lightning arrester will act quickly to make the lightning arrester separate from the power supply and ensure the safety of the system.
This series of single-phase power supply lightning arrester adopts exquisite integrated structure, with guide rail slot at the bottom and display panel at the top, which is very convenient for installation and use. It can be installed on 35mm rail in any kind of power distribution cabinet.
Main Character:
- Integrated structure, double hole wiring, reasonable structure, convenient installation, simple maintenance
- The full mode protection technology of L-N and N-PE or L-PE and N-PE is adopted
- The working voltage range is wide, and can be used in areas with large fluctuation of power supply voltage
- Built in high reliability deterioration automatic release device, which can operate immediately after over current and overheating to ensure safety
- The full plastic casing is made of grade V0 fire-proof polycarbonate (PC)
- It has the functions of fault alarm, deterioration indication, remote signaling and lightning counting (optional)
Parameter: Type | BT B100S TVSS | BT 120S TVSS | BT 160S TVSS |
| Protection level | Class I / Class B |
| Scope of application | TT/TNS system |
| System structure | 1+1 circuit or four wires to earth mode |
| Max. continuous voltage [Uc] | 385V~ |
| Normal operating voltage AC voltage [UN] | 220V~ |
| Response time [tA] | ≤ 25ns |
| Max. discharge current (8/20μs) [Imax] | 100kA | 120kA | 160kA |
| Nominal discharge current (8/20μs) [In] | 40kA | 50kA | 60kA |
| Lightning impulse current (10/350μs) [Iimp] | 40kA | 40kA | 40kA |
| Residual voltage (20kA 8/20μs) [Ures] | 1600V | 1600V | 1600V |
| Voltage protection level [Up] | 2000V | 1800V | 2000V |
| Power indication | Green LED, when normal, it is light on |
| Alarm mode | Red LED, light alarm and remote signal switch alarm |
| protection circuit | Built in high reliable over-current and overheat trip device |
| Lightning counter | Optional configuration |
| Power wiring | 16mm2 ~ 25mm2 solid / flexible |
| ground wire | 25mm2 solid / flexible |
| Alarm wiring | 0.14mm2 ~ 0.5mm2 |
| Enclosure material | V0 fireproof polycarbonate (PC) all plastic case |
| Enclosure color | The upper enclosure blue, the lower enclosure white |
| Overall weight | 350g ~ 430g |
| Dimension | 130 x 100 x 83 mm |
| Operating temperature range [Tu] | -40°C...+80°C, RH ≤ 95% |
| Mounting on | 35mm DIN rail |
| Product quality | Three years |
| Ordering information |
| Type | BT B100S TVSS | BT 120S TVSS | BT 160S TVSS |
| Art.-No. | 170 345 | 170 375 | 170 385 |
| Packing unit | 1pc(s) | 1pc(s) | 1pc(s) |
Q: Are you a factory or a trade company?
A: We are the factory.
Q: Where are your products distributed?
A: Our products are distributed all over the world, Main market are Europe, North America, the United Arab Emirates, Africa and so on.
Q: Can I have a sample?
A: Yes, but according to our company's policy, we provided free samples, while you should pay the freight fee; the sample can be delivered by TNT/DHL/UPS/FEDEX.
Q: Which port is the nearest from you?
A: Guangzhou port or Shenzhen Port or Hong Kong port.
Q: What's your lead time?
A: Sample lead time: 3~5 working days. Mass production: usually 10~30days.
For big orders, honestly, it depends on the order quantity and designs.
Q: When can I get the price?
A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry as priority.
Q: Can you do the design for us?
A: Yes, we have a professional team having rich experience in molding design, electrical system developing and manufacturing. Please just tell us your ideas and we will help you to carry out your ideas into a perfect artwork. You can pay for the molding fee and own the mold by yourself or we can cooperate on the molding.
Q: OEM & ODM are accepted or not?
A: OEM&ODM are welcome.
Address:
No. 6, Xiaolin Jinhua Road, Hongqi Town, Jinwan District, Zhuhai
Business Type:
Trading Company
Business Range:
Electrical & Electronics
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
){kind=link}